Basic Operation
Power Switch
The camera can operate only after the <
¡
To save battery power, the camera turns off automatically after 1 minute
of non-operation. (p.35) To turn on the camera again, just press the
shutter button halfway.
¡
If you turn the <
being recorded onto the memory card, the remaining number of captured
images to be recorded will be displayed on the top LCD panel. When all
the images are finished recording, the display will turn off and the camera
will turn off.
2
<
> : The camera is turned off and
1
<
> : To turn on the camera, set to
d
<
> : This is the same as <
4
2
> switch to <
4
> switch is turned on.
does not operate.
this position.
except that the beeper sounds
when focus is achieved in the
One-Shot AF mode or with
manual focus.
> while the captured images are
1
>
27