Silvercrest BTST-9300 Owner's Manual & Service Information page 52

Pairing with the Stereo Adapter
Control button
Blue indicator
10
Plugging the audio connector into the
audio playback device
Next plug the stereo adapter connector into your
audio playback device (e.g. an MP3 player). You
may use any audio playback device with a
3.5mm audio plug.
Starting the pairing on the stereo
adapter
Press and hold the control button on the stereo
adapter for at least six seconds until the red and
blue control indicators flash alternating. The
stereo adapter is now ready to connect to a
remote device.
If the stereo adapter was already powered on,
it is not possible to start the pairing mode. In
this case, you must turn it off first by keeping
Red indicator the control button pressed until it powers off.
Note