Nokia IP30 User Manual page 129

If the URL filtering is required, then make sure the UFP server
in the Server page of SMC is correctly configured.
I cannot connect to SmartCenter FP3 VPN site using IP30
Satellite or Satellite Plus when using Dynamic IP with cerificate
support (DAIP). What should I do?
Check for the installed certificate VPN >Certficate.
Check for the following error messages in Reports >Event
Log:
Error Message
Failed to Create VPN
tunnel:Client Encrypt
Notification
Failed to Create VPN
tunnel:Could not
validate my certificate
Failed to Create VPN
tunnel:Invalid certificate
Failed to Create VPN
tunnel:Invalid cert
encoding
I cannot connect to the Check Point SmartCenter FP3 VPN site
using IP30 Satellite or Satellite Plus configured using VPN
Communities. What should I do?
Check for the following error messages in Report >Event Log:
IP30
Frequently Asked Questions
Verify
Ensure that on the FP3 management
station the authentication mechanism
followed is 3DES/SHA1
Ensure that the certificate used in the
device is the one associated to the
certificate created for this gateway on
Smart Center FP3
Ensure that the certificate used is not
expired
Ensure that the certificate used is
PKCS#12 format
129