Printing On Transparencies - Brother HL-4200CN User Manual

Printing on Transparencies

Use the multi-purpose tray to print transparencies.
Use only the recommended type of transparencies (3M CG3300). Do not use any other type,
such as color transparencies (bordered with a white frame).
Using unsuitable transparencies can cause damage to the printer.
Do not use transparencies bordered with a white frame.
Remove each transparency sheet from the face down output tray as soon as it is printed. When
transparencies are allowed to accumulate in the face down output tray, static electricity can build
up and cause jams.
Transparencies can also be fed from tray 1/2/3. When feeding transparencies from tray 1/2/3,
however, load plain paper to about 30 mm in height in the tray first, and then load transparencies
about it. In this case, up to 100 sheets of transparencies can be loaded.
Follow the steps below to print transparencies.
1
Adjust the paper guide to the mark for the size you
are about to use.
2
Fan a few transparencies at a time.
3 - 20 LOADING PAPER AND USABLE PAPER TYPES