Preparations For Use - Motorola 592HSMTB User Manual

Side-by-side inverter refrigerator
Table of Contents

Advertisement

III. Preparations for use 
 
Installation location: 
 
1.
Ventilation condition 
The position you select for the installation of your refrigerator should be well-ventilated and away from hot air. Do 
not locate the refrigerator near a heat source such as a cooker, and avoid it from direct sunlight, thus guaranteeing 
the refrigeration effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to 
prevent the refrigerator from rusting and leaking electricity. The result of the total space of the room in cm​
the refrigerator is installed should be divided by the refrigerant charge amount of the refrigerator and should not 
be less than 8 g/ M​
3​
Note: The amount of refrigerant charged for the refrigerator can be found on the rating label. 
 
2.
Heat dissipation space 
When working, the refrigerator gives off heat to the surroundings. Therefore, at least 300mm of free space should 
be left at the top side, more than 100mm on both sides, and about >50mm at the back side of the refrigerator. 
 
 
Dimensions in mm:
912 
704 
Note:Note:Figure 1, Figure 2 only illustrates the space demand of the product. 
3.
Level ground 
Place the refrigerator on a solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and 
noise. When the refrigerator is placed on flooring materials as carpet, straw mat, polyvinyl chloride, the solid 
backing plates should be applied underneath the refrigerator, so as to prevent color change due to heat 
dissipation. 
Unobstructed ventilation should be maintained around the appliance or in the embedded structure. 
 
Preparations for use 
 
1.
Standing time 
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to start the 
refrigerator after more than 1 hour of standing, so as to ensure its normal operation. 
 
2.
Cleaning 
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth. 
 
3.
Power-on 
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature 
inside the freezer compartment drops, it indicates the refrigeration system is working normally. 
 
4.
Storage of food 
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically 
1770 
1524 
 
C(°) 
1062 
160 
50 
3​
which 
100 
5
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents