MEMO:
The CCD unit in the reader unit cannot be replaced in the field. If the CCD
unit is broken, replace the reader unit.
4.4.2.3 Procedure after Replacing the Reader Unit
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
After replacing the reader unit, execute automatic detection of the CCD read-
ing position at ADF stream reading in the following service mode.
COPIER> FUNCTION> INSTALL> STRD-POS
[Operation]
Adjust the reading position by moving the scanner in increments of 0.1
mm.
[Time]
When the lamp is turned on: Adjustment time; 10 seconds
When the lamp is not turned on: Lamp adjustment time; 10 to 30 seconds
+ Adjustment time; 10 seconds
[2]
[1]
F-4-23
0021-0345
Chapter 4
4-11