Table of Contents
Advertisement
6
User Menu Options
6.1
Inhibiting a Zone
Siemens Building Technologies
Fire Safety & Security Products
The following functions are available to users under MENUS on the Keypad.
In navigation mode following input of user code, the user selects one of a number
of pre-defined programming options from a list. Pressing the up/down arrow keys
scrolls the list of options available for selection. An ellipsis (...) on accompanying
graphics denotes when there is a choice of menu selection by scrolling.
Zones on the system can be manually inhibited
from the Keypad. Inhibiting a zone removes that
zone from the system, silently disregarded, for
one alarm set period only.
1.
Press SELECT the INHIBIT option on the
Keypad.
2.
Scroll to the ZONES option and press
SELECT (right soft key).
3.
Scroll and select the required zone and
toggle the setting from NOT INHIBITED to
INHIBITED using the up/down arrow keys.
4.
Press SELECT (right soft key) to exit user
programming.
NOTE
Only the Alarm, Exit/Entry, Fire Exit and Line Zone types can be inhibited on the SPC system. All
other zone types are not displayed in the inhibit menus.
User Menu Options
...INHIBIT...
EXIT
SELECT
...ZONES...
BACK
SELECT
...ZONE1...
BACK
SELECT
...INHIBITED...
BACK
SELECT
09.2008
17
Advertisement
Table of Contents
