Table of Contents
Advertisement
Assembling
After cleaning, please assemble the parts including the head, water tank and lids
as follows:
1. Put the seal ring in order first (the seal ring cannot turn up), then insert the
head into the hole.
2. Hold the two sides of the water tank tightly, fit the water tank along the guides
on the door.
3. Push the two sides of the water tank downwards as the picture shows.
4. When you hear clicks on both sides and at the same time, then both sides of
the water tank is closed to the door liner, It means the installation is complete.
Filling water
Before you fill the drinking water into the water tank, ensure that the water
tank is steady and in the correct position
Caution!
Fill with water up to 3.5L (which is suggested) and not above that level.
Otherwise, it may overflow when the lids is closed.
We recommend that you fill the water in the following way.
Open the small lid and fill water from the inlet of the larger lid.
Warning!
Don't touch the other parts of the appliance when filling water, it may cause
water leakage.
Please pour water slowly, or the water will overflow. In this situation, it may
damage the mechanism.
Advertisement
Table of Contents
