Brother HL-3450CN Series Quick Setup Manual

Color Laser Printer HL-3450CN series
Quick Setup Guide
Read the "Safety Sheet" first to ensure that you use this printer safely.
Read this "Quick Setup Guide" before you set up the printer.
Before you can use the printer, you must set up the hardware and install the driver.
Identify the operating system on your computer (Windows
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface you intend to use (Parallel, USB or Network).
Most existing parallel cables support bi-directional communication, but some might have an incompatible pin assignment or may not be IEEE 1284 compliant.
If you are an Administrator, configure your network printer settings referring to the Network Quick Setup Guide (reverse side).
Printer Carton Components
Carton components may differ from one country to another.
Save all packing materials and the printer carton. They should be used when shipping the printer.
CD-ROM Quick Setup Guide
®
(including User's Windows Driver Installation Guide
®
Guide) Macintosh Driver Installation Guide
LJ3765001 Printed in Japan
Setting Up the Printer
Step 1 Install the Oil Bottle and the Fuser Cleaner
Protective Parts Fuser Cleaner Lock Lever
Oil Bottle Lock Lever
Top Cover
1 Remove the protective parts. 2 Release the oil bottle lock levers and
Open the top cover. the fuser cleaner lock levers.
Step 2 Install the OPC Belt Cartridge
Front
Belt Cartridge
Cover
Lock Levers
Open the front cover. Release both belt cartridge
1 2
lock levers by pulling them up.
Step 4 Load Paper in the Paper Tray
Paper Tray
Cover
Paper Tray
1 Remove the paper tray cover. 2 Adjust the paper guides to fit the size of paper
you want to load.
Load paper in the paper tray.
® 95 / 98 / Me, Windows NT ® 4.0, Windows ® 2000 / XP or Macintosh
AC power cord
Oil bottle Fuser cleaner OPC belt cartridge
Fusing Unit Pressure
Release Lever
3 Move the fusing unit pressure release
levers to the SET position.
Note: Please be careful not to touch the green surface of the OPC belt or expose it to light for
any length of time.
Belt Tension Release Pin Protective Sheet
OPC Belt Cartridge Printer Guides
Remove the orange belt tension release Insert the OPC belt cartridge
3 4
pins from both sides of the OPC Belt into the printer guides with
cartridge. the flat side facing you.
Remove the protective sheet.
Step 5 Print a Test Page
3 Fit the paper tray cover. 1 Make sure the printer power button is off.
Insert the paper tray into the Do NOT connect the interface cable.
printer.
® ).
Oil syringe Envelope adapter Toner cartridges
(Black, Yellow, Magenta
and Cyan)
Paper tray
Oil Bottle
Fusing Unit
4 Install the oil bottle in the fusing unit with the 5 Lock both oil bottle lock levers.
label side facing you.
Step 3 Install the Toner Cartridges
Toner Cartridge
Lock the belt cartridge lock Rock the toner cartridge
5 1
levers. 3 to 4 times.
Close the top cover.
Note: When you want to change the language of the control panel message, refer to "Setting Your Language on the Control Panel" on the reverse side.
2 Connect the AC power cord to the
printer, and then plug it into the AC
outlet.
Continue to the Windows
What is Included on the CD-ROM
You can Find a Variety of Information on the CD-ROM.
Install Software
Install the printer driver and utilities.
(Mac OS X is not supported by Install Software.)
Maintenance Tutorial
Instructional movie for printer maintenance.
®
Windows
Manual
View the User's Guide and Network User's Guide in PDF format. (Viewer included)
Color PDF Print Samples
View color samples of printouts from an HL-3450CN in PDF format.
Learn More
Watch instructional movies to learn about our unique software features.
Brother Solutions Center
The Brother Solutions Center (http://solutions.brother.com) is your one-stop
resource for all your printer needs.
Download the latest drivers and utilities for your printers, read the FAQs and
®
Macintosh
troubleshooting tips, or learn about special print solutions.
Fuser Cleaner
6 Insert the fuser cleaner into the fusing
unit with the roller side facing you.
'REMOVE' Tape
Protective
Cover
Pull off the tape labeled Install the toner cartridge by sliding it into
2 3
'REMOVE,' and then remove the correct guide. Match the cartridge color
the orange protective cover. label to the corresponding label on the
printer.
Control Panel
K C M Y
NETWORK READY
HL-3450CN
3 Turn on the power 4 After the printer has warmed up, the
button. READY message will appear.
®
Driver Installation Guide or Macintosh
7 Lock both fuser cleaner lock levers.
Color Labels
Repeat Steps 1 through 3 for
4
the remaining toner cartridges.
Close the front cover.
K C M Y
NETWORK READY
HL-3450CN
Press the Go button. The printer will print a test page.
5
Check that the test page is printed correctly.
®
Driver Installation Guide.