Document Jam - Brother MFC-J430w Basic User's Manual

Document jam

Documents can jam in the ADF unit if they are
not inserted or fed properly, or if they are too
long. Follow the steps below to clear a
document jam.
Document is jammed in the top of the
ADF unit
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Remove the jammed document by
pulling it upward.
d
Close the ADF cover.
e
Press Stop/Exit.
IMPORTANT
To avoid future document jams close the
ADF cover properly by pressing it down in
the middle.
Document is jammed inside the ADF
B
unit
a
Take out any paper from the ADF that is
not jammed.
b
Lift the document cover.
c
Pull the jammed document out to the
left.
B
d
Close the document cover.
e
Press Stop/Exit.
Troubleshooting
B
B
61