Wireless installation for Macintosh
20
Disconnect the network cable between your access
point (hub or router) and the machine, and click
Next.
21
The machine will restart automatically. After the
machine is restarted, check Checked and
confirmed., and then click Next. Wait until the
restart is completed. Go to step 23.
22
Using the information you recorded in step 12, return
the wireless settings of your computer back to their
original settings. Click Exit.
You have completed wireless setup. A four level indicator of your machine's LCD
represents the wireless signal strength. If you chose to install the drivers in step 7,
go to step 23.
23
The driver installation starts. Follow the on-screen instructions and restart your Macintosh
(Not available if you chose Driver Install Only in step 7.)
®
9
®
.
9 - 9