Nokia Customer Care
6. Connect the UI with PWB
A. Connect the BTB to connect display and PWB.
B. Release the protect film on the display surface.
7. Assemble LCD Module Shielding
Snap and assemble LCD Module Shielding Assy.
8. Bolt all the screws
Use a non-conductive Torx #6 screwdriver to remove the six screws, the torque
driver set to 15+/- 2 Ncm @ 450 +/-50 rpm is recommended.
Issue 1 04/2007
© 2007 Nokia Corporation
Disassembly/Assembly
Company Confidential
1265(RH-103)
Page 13