Sony DPP-FP70 Operating Instructions Manual page 53

Printing
Symptom
Check
Paper does not • Is the print paper properly
feed.
• Does the ink ribbon or
• Are you using print paper
• Is the print paper
The print paper • Is it in the middle of the
emerges
partially during
printing in
process.
set in the paper tray?
print paper run out?
that was not designed for
the printer?
jammed?
printing process?
Cause/Solutions
c If print paper is not properly loaded,
the printer may develop trouble.
(.Read This First)
Check the following:
• Insert the correct set of print paper
and ink ribbon.
• Load the print paper in the correct
direction in the tray.
• You can insert the maximum 20
sheets of print paper into the tray. If
the sheets exceeds 20, remove the
extra sheets.
• Riffle the print paper thoroughly
and insert them into the tray.
• Do not bend or fold the print paper
before printing, which may cause
malfunction with the printer.
c If an error message is displayed on the
screen, check the error message.
c Use print paper designed for the
printer. If you use incompatible print
paper, the printer may develop
trouble. (.Read This First)
c When the printer cannot feed the print
paper, an error message is displayed.
Check paper jam. (.page 68)
c The print paper may emerge a few
times during printing. Do not touch
nor pull the emerged paper. Wait for
the print paper to be fully ejected after
printing ends. As the print paper
emerges from the rear a few times
during printing, make sure to spare
enough space behind the printer
during printing. (10 cm or more)
Continued
53 GB