Faxing A4 Size Documents From The Scanner Glass; Color Fax Transmission; Canceling A Fax In Progress; Broadcasting (Black & White Only) - Brother MFC MFC-5460CN User Manual

Brother printer/fax/scanner/copier user's guide mfc-5460cn, mfc-5860cn
Hide thumbs Also See for MFC MFC-5460CN:
Table of Contents

Advertisement

Faxing A4 size documents
from the scanner glass
When documents are A4 size, you need to
set Scan Size to A4. If you do not, the bottom
portion of the faxes will be missing.
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 0.
c
Press a or b to choose A4.
Press OK.

Color fax transmission

Your machine can send a color fax to
machines that support this feature.
However, color faxes cannot be stored in the
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).

Canceling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
Broadcasting
(Black & White only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed-Dial
numbers and up to 50 manually dialed
.
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Make sure you are in Fax mode
b
Load your document.
5
c
Enter a number. Press OK.
You can use either a Speed-Dial, a
Group, or a manually entered number
using the dial pad.
d
Repeat step c until you have entered
all the fax numbers you wish to
broadcast to.
e
Press Black Start.
5
Note
• If you did not use up any of the numbers
for Groups or access codes or credit card
numbers, you can 'broadcast' faxes to as
many as 150 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
• Enter the long dialing sequence numbers
as you would normally, but remember that
each Speed-Dial number counts as one
number, so the number of locations you
can store becomes limited.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.
Sending a fax
5
.
5
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-5860cn

Table of Contents