Using The Unit; Record The Gps Log Using The Gps Unit - Sony GPS-CS1 Operating Instructions Manual

Gps unit
Hide thumbs Also See for GPS-CS1:
Table of Contents

Advertisement

Available languages

Available languages

Using the unit

Record the GPS log using the GPS unit

This unit can record your position and time (GPS log files) in the internal
memory. When you turn on the power, tracking starts, and GPS log
recording starts. The unit tracks the location automatically and records
the position every fifteen seconds after tracking starts.
1
Press the
Direct the antenna portion of the unit to the sky in open sky environments and
hold it for about a minute until the GPS lamp is in the tracking process.
The GPS lamp status differs as illustrated below depending on the operating
status of the unit.
While tracking*
flashes once slowly
While searching*
flashes twice rapidly
* tracking: the unit is tracking and recording the GPS log.
searching: the unit is searching for the GPS satellites and GPS log recording
hasn't started.
When it is difficult to make tracking and while the GPS lamp is in
searching, direct the antenna portion of the unit upward and wait for a
while.
If the unit cannot track even after waiting for five minutes, you may be in a
location where the radio signals from GPS satellites cannot be reached. Change
the location and try again.
(Power) button longer to turn on the unit.
2 seconds
1 second
Antenna portion
(Power) button
GPS lamp
flashes once slowly
flashes twice rapidly
Using the unit
GB
GB
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents