Sony BRAVIA FW-85BZ40H Reference Manual page 16

For product protection and safety
reasons, Sony strongly recommends that
installation of your LCD Display on the
wall be performed by qualified
professionals. Do not attempt to install it
yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this LCD Display, especially to
determine the strength of the wall for
withstanding the LCD Display's weight.
• The screws for Wall-Mount Bracket are
not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
VS
• Refer to the following table for
wall-mount hole pattern.
Model Name
FW-85BZ40H
FW-75BZ40H
FW-65BZ40H
FW-55BZ40H
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied Safety Booklet for additional
safety information.
• For more detailed information, visit Sony
Customer Support website.*
16
US
Screw (M6)
Wall-Mount Bracket
Wall-mount hole
pattern
×
400 × 400 mm
300 × 300 mm
300 × 300 mm
300 × 300 mm
* Only on limited region/country/LCD Display
model.
1
Remove the screws from the rear of
the LCD Display.
2
Attach the Wall-Mount Attachment
(supplied with the LCD Display) to
the rear of the LCD Display (to make
it parallel with the wall).
3
Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
VS
1.5 N·m
{15 kgf·cm}
Wall-Mount Bracket
(not supplied)
Screw
(not supplied)