Page 1
PAMS Technical Documentation NHM–7 Series Transceivers Disassembly Instructions E Nokia Corporation Issue 1 10/2001...
Page 2
Disassembly of NHM–7 ........E Nokia Corporation Page 2...
Page 3
NHM–7 PAMS Technical Documentation Disassembly Instructions Disassembly of NHM–7 Remove Battery cover. In assembly note! Remove Battery. E Nokia Corporation Page 3 Issue 1 10/2001...
Page 4
NHM–7 PAMS Technical Documentation Disassembly Instructions Remove A–cover. Remove Keypad (only if it is necessary to re- place keypad). In assembly place A–cover pins (4 pieces) in respective holes in the keypad. E Nokia Corporation Page 4 Issue 1 10/2001...
Page 5
Do not damage the following items when handling the UI module: 1. Speaker spring contacts. 2. LCD driver. 3. LCD contact pads. 4. UI PWB contact pads. 5. UI frame metal coating. E Nokia Corporation Page 5 Issue 1 10/2001...
Page 6
5. UI frame metal coating. Remove speaker (only if it is necessary to replace speaker). Speaker can be lifted up using straight–bladed screwdriver as shown in the picture. Note! Do not touch speaker springs or membrane. E Nokia Corporation Page 6 Issue 1 10/2001...
Page 7
Do not touch the following spring contacts when handling the module: 1. LCD connector. 2. Board to board connector. Remove System connector Note! Do not damage the spring contacts in the System connector. E Nokia Corporation Page 7 Issue 1 10/2001...
Page 8
3. Turn the SIM cover to upright position. 4. Squeeze the SIM cover slightly from the side to release the side fixings one at the time. 5. Pull SIM cover out of B cover. E Nokia Corporation Page 8 Issue 1 10/2001...