Antenna; Antenna Overview - Nokia 500 Service Manual

RM-750
Cellular RF troubleshooting
Setting
Signal generator
RF level (CW
signal)
2. Activate WCDMA RSSI reading in Phoenix (Testing —> WCDMA —> Rx Power Measurement) .
3. In the Rx Power Measurement window, make the following settings:
4. Click Start to perform the measurement.
Results
Result reading should reflect the level of the signal generator (- losses) +/- 5 dB.
The
When varying the level in the range of -40 to -100 dB, the reading should follow within +/- 5 dB.
Note: In some versions of the Phoenix service tool, the
not work as it should. In these cases, the result is something really small (for example -8387684.9).

Antenna

Antenna overview

RM-750 has four antennas:
• GSM/WCDMA low band antenna
• GSM/WCDMA high band antenna
• WLAN/BT antenna
• GPS antenna
The RF antennas are located at the lower end of the phone and the WLAN/BT and GPS antennas at the top
part of the phone. The connection from the phone PWB to the antennas is implemented by spring contacts
(3 pcs).
Issue 1
WCDMA I WCDMA II
-48 dBm -48 dBm
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
WCDMA IV WCDMA V
-48 dBm -48 dBm
WCDMA Rx Power Measurement tool does
WCDMA VIII
-48 dBm
Page 5 – 23