D-Link DAP-1610 Quick Install Manual page 7

Configure the DAP-1610
Using QRS Mobile Setup
Scan the code below or search "QRS Mobile" (App Store or Google Play) to
1
download the QRS Mobile App to your iPhone, iPad, or Android device.
Once your app is installed, you may now configure your range extender.
2
Connect to the range extender wirelessly by going to your wireless utility
on your device. Scan for the wireless network name as listed on the
supplied Wi-Fi Configuration card/sticker. Select the network and then
enter the Wi-Fi Password.
Once connected, tap on the QRS Mobile icon from your mobile device,
3
then tap Start to continue. Please follow the on-screen instructions to
complete the setup.
SmartConnect: By default, SmartConnect is enabled on this Range Extender.
SmartConnect will automatically steer your device to the optimal wireless
band according to current network traffic. When enabled, you will only see
one wireless network from your Range Extender.
Note: To reconnect to your range extender, launch your wireless utility, select
the new Wi-Fi Network you created, and then enter your new Wi-Fi password.
DAP-1610 Install Guide
iOS
Android
Wi-Fi Name(SSID):
dlink-xxxx
Password: xxxxxxxx
Username: "Admin"
Password:" " (leave the field blank)
QRS Mobile App
Wi-Fi Name(SSID):
Wi-Fi Password:
Your con guration
Username: "Admin"
Password:
DCCAROOWIFI0020
7