Automower ® Connect Menu - Husqvarna AUTOMOWER 310 Operator's Manual

Note: The product is available for pairing for 3
minutes. If pairing has not been successful within
this time period, turn off the product (Main switch,
position 0). Wait until the LED indicator lamp goes
out, and then set the Main switch to position 1 again.
4. Enter the PIN code for the product.
My mowers in the Automower
5. Select
and then select the plus sign (+).
6. Select model. The Automower
searching for available products within short-range.
®
7. For Automower 310 and Automower
®
Automower Connect:
a. Enable Bluetooth
®
The Automower
for available products within short-range.
b. Select the product.
®
8. For Automower 315X, Automower
®
Automower 315 equipped with accessory
®
Automower Connect:
• Follow the pairing instructions in the app.
9. Name your product, and select
®
3.11 Automower Connect menu
The main menu in Automower
options:
Dashboard
•
Map (only available with Automower
•
Settings
•
Messages (only available for Bluetooth short-range
•
connectivity)
3.11.1 Dashboard
The dashboard shows the current status of the robotic
lawnmower both visually and in text. It is very easy to
control the robotic lawnmower by tapping the controls,
Park .
for example
In the lower part of the dashboard there are shortcuts to
Timer settings and the Map . The dashboard also
the
shows symbols according to below:
1. The battery status shows the remaining battery
charge. A flash is shown over the battery symbol
when the robotic lawnmower charges its battery. A
plug is shown over the battery symbol when the
robotic lawnmower is standing in the charging
station without charging.
20 - Installation
®
Connect app,
®
Connect app is now
®
315 without
®
mode on your mobile device.
Connect app is now searching
®
310 and
Done .
®
Connect offers 4
®
Connect)
For more information about the operating modes
Park and Pause , see Operation on page 43 .
3.11.2 Map
The map shows the current position of the robotic
lawnmower and the set centerpoint (origin) for
GeoFence.
3.11.2.1 Map settings
Map in the main menu.
1. Open
2. Tap the settings symbol down to the right.
Movement path .
3. Enable/disable
Map view or Satellite view .
4. Choose
3.11.3 Settings - overview
For many working areas there is no need to change the
default settings. However sometimes, depending on the
lawn complexity, the mowing result can be improved by
making manual settings.The following settings can be
®
done in the Automower
Timer
•
Operation
•
Installation
•
Accessories
•
The timer function is an ideal tool to control which
periods the robotic lawnmower should not mow, for
example when children are playing in the garden. See
Timer and Standby on page 44
For an overview of possible settings, refer to
structure overview on page 37 .
3.11.4 Messages
In this menu the previous fault and information
messages can be found. For some of the messages,
there are tips and advice to help to rectify the fault.
Messages menu is only available for
Note: The
Bluetooth short-range connectivity.
If the robotic lawnmower is disrupted in any way, for
example it is trapped or the battery is low, a message is
saved relating to the disruption and the time it
happened.
Start,
Connect app:
Menu
840 - 001 -