Assembly; Safety Information For Installation; Mounting - Siemens SITRANS DA400 Operating Instructions Manual

Process monitoring with protection against explosion

Hide thumbs Also See for SITRANS DA400:

Table of Contents

Assembly

4.1

Ambient temperature

Warning

Ambient temperature

When installing the sensor, attention should be paid to the surface temperature at the

installation location. For example, if you are installing the sensor on a pump, there is a risk of

burns if the pump is too hot.

4.2

Overview

The device and the sensor are mounted in different ways. In general:

Note

Protection against harmful outside influences

To protect the device against harmful outside influences, a casing should be fitted. Harmful

external influences can occur if you install the SITRANS DA in the open air, where it can be

influenced by intensive frost, heat or rain.

Mounting the device

To mount the device, you need three screws with a diameter of 6 mm. These are not

supplied with the device.

SITRANS DA400 with protection against explosion

Operating Instructions, 02/2006, A5E00684661-01

4-1

Table of Contents