Inserting The Date And Time On A Still Image - Sony DSC-F717 Operating Instructions (primary manual) Operating Instructions Manual

Inserting the date and time on a still image

CAMERA 1
1
MOVING IMAGE : MPEG MOVIE
2
DATE/TIME : OFF
DIGITAL ZOOM : ON
RED EYE REDUCTION : OFF
HOLOGRAM AF : AUTO
CONVERSION LENS : OFF
SELECT
1
, Set the mode dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time do not appear on the screen
during shooting, instead, "
upper left corner of the screen. The actual date
and time appear during playback only.
28
2
, Select
on the control button, then
press B.
Select [DATE/TIME] with v/V,
then press B.
• If you select [DATE], the date is superimposed
" appears in the
onto the image in the order selected in "Setting
the date and time" (page 16).
CAMERA 1
1
MOVING IMAGE : DAY&TIME
2
DATE/TIME : DATE
DIGITAL ZOOM : OFF
RED EYE REDUCTION :
HOLOGRAM AF :
CONVERSION LENS :
OK
1 (CAMERA 1) with v
CAMERA 1
1
MOVING IMAGE :
2
DATE/TIME :
DIGITAL ZOOM :
RED EYE REDUCTION :
HOLOGRAM AF :
CONVERSION LENS :
PAGE SELECT
3
, Select the date and time setting
with v/V on the control button,
then press z.
DAY & TIME: Superimposes the date,
hour, and minute onto the image.
DATE: Superimposes the year, month and
day onto the image.
OFF: Does not superimpose the date and
time onto the image.
After the setting has been completed, set the
mode dial to , and shoot the image.
• You can also shoot images with the mode dial
,
set to S, A, M or SCN.
• This setting is maintained even when the power
is turned off.
MPEG MOVIE
DATE
ON
OFF
AUTO
OFF