Table of Contents
Advertisement
PAN9520 Wi-Fi Module
2. Click Component config > PHY to apply the setting.
➔ Now the PAN9520 use the "phy init data" binary.
➔ The default partition table will include a corresponding partition at address "0x8000",
to which the binary must be flashed.
For further details please refer to
idf/en/v4.2/esp32s2/api-reference/kconfig.html?highlight=support%20multiple%20phy#config-
esp32-phy-init-data-in-partition.
Using a Binary with Multiple "Phy Init Data" Sets
It is also possible to create a binary that contains "phy init data" sets for several regions. The
binary data is then selected depending on the used country code.
For further details please refer to
idf/en/v4.2/esp32s2/api-reference/kconfig.html?highlight=support%20multiple%20phy#config-
esp32-support-multiple-phy-init-data-bin.
Further Readings
"Phy init data" documentation:
fault/files/documentation/esp32_phy_init_bin_parameter_configura-
tion_guide_en.pdf
PHY project configuration:
idf/en/v4.2/esp32s2/api-reference/kconfig.html?highlight=support%20multi-
ple%20phy#phy
Module Integration Guide Rev. 1.1
6 Regulatory and Certification Information
https://docs.espressif.com/projects/esp-
https://docs.espressif.com/projects/esp-
https://www.espressif.com/sites/de-
https://docs.espressif.com/projects/esp-
Page 28 of 44
Advertisement
Table of Contents
