Consumption/Dew Point Sensors Fs109/211 Series & Dp110 - Beko METPOINT BDL Instructions For Installation And Operation Manual

Connection of the sensors
11.3 Consumption/dew point sensors FS109/211 series & DP110
24
DP110
FS109
FS211
The digital data transmission between the BDL and the
sensors FS 109/211 and DP110 is implemented via the
SDI bus line.
Alternatively, the user can use the DP110 as a 4 – 20 mA
analog sensor in 3-wire technology.
BDL with an external transmission
For the transmission of the 4 - 20 mA current signal to an
external display, PLC, or central control system, please
open jumper pin 4 (analog IN) to support pin 9
(ext. display), and integrate the external display.
BDL
METPOINT® BDL