Installing The Speakers - Kenwood KCA-HX7C Instruction Manual

Ñ
Using the Glued Surface Mounting Plate
If you cannot install the clamp unit on the helmet, you can use the glued surface
mounting plate to attach the clamp unit to the surface of the helmet.
1
2
6 INSTALLING THE HEADSET ON YOUR HELMET
Attach adhesive tape of the glued
surface mounting plate to the
helmet.
h Make sure that the glued surface h
mounting plate sticks on the
helmet firmly. Maximum adhesion
occurs after 24 hours.
Attach the main unit to the glued
surface mounting plate until you
hear a click.

Installing the Speakers

1
2
Attach the hook and loop fasteners
for speakers to ear pockets inside
the helmet.
Attach the speakers to the hook and
loop fasteners for speakers inside
the helmet.