2-1. Removal of cabinets
2-1-1. Side plate, Cassette panel
[Side plate]
Remove the four screws.
PWH 4 x 14
Side plate
2-1-2. Meter panel, Switch panel
[Meter panel]
1. Remove the cassette panel.
2. Remove the three screws.
3. Disengage the three pawls from chassis, and remove
the meter panel.
Switch panel
CCP-1100SF
Section 2
Service Overview
Stepped screws M3
Pawl
PWH 3 x 6
Cover
Pawls
[Cssette panel]
Remove the three stepped screws, and remove the cassette
panel.
. Note that a pawl is attached to panel.
Cassette panel
Side plate
[Switch panel]
1. Remove the cassette panel.
2. Remove the three screws, and the cover.
. Note that the two pawls are attached to panel.
3. Remove the three screws, and disconnect the connector
on SW-7 (M) board.
4. Disengage the three pawls from chassis, and remove
the switch panel.
Meter panel
PWH 4 x 14
2-1