Audio Settings - Sony BDP-SX1000 Operating Instructions Manual

Audio Settings

Audio (HDMI)
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM
Outputs PCM signals from
the HDMI OUT jack.
BD Audio MIX Setting
On Outputs the audio obtained
by mixing the interactive
and secondary audio to the
primary audio.
Off Outputs the primary audio
only. Select this to output
HD audio signals to an AV
amplifier (receiver).
DTS Neo:6
Cinema Performs "DTS Neo:6
Cinema" mode decoding. A
source recorded in 2-channel
format is decoded into 7
channels.
Music Performs "DTS Neo:6
Music" mode decoding. A
source recorded in 2-channel
format is decoded into 7
channels. This setting is
ideal for normal stereo
sources such as CDs.
Off Turns off "DTS Neo:6"
decoding.
Audio DRC
Auto
Performs playback at the
dynamic range specified by
the disc (BD-ROM only).
Other discs are played back
at the "On" level.
On Performs playback at a
standard compression level.
Off No compression works. A
more dynamic sound is
produced.
Downmix
Surround Outputs audio signals with
surround effects. Select this
when connecting an audio
device that supports Dolby
Surround (Pro Logic)
DTS Neo:6
Stereo
Outputs audio signals
without surround effects.
Select this when connecting
an audio device that does not
support Dolby Surround
(Pro Logic) or DTS Neo:6.
*1
*2
*1
or
*2
.
21