Manual Flash
How to Set the Firing Output of the Manual Flash with the FE Memory Function
Metered Manual Flash Exposure
The flash output can be set in 1/3-stop increments from full flash (1/1) to 1/8192 flash.
Use a flash meter (commercially-available) to determine the required flash output to obtain a
correct flash exposure. Setting the camera's shooting mode to <
recommended.
1.
Select <
2.
Set the flash mode to <
> with the joystick.
Press the joystick up, down, left, or right, or turn <
<
>, then press the joystick vertically.
>.
71
> or <
> is
> and select