Casse E Security Keylocking - AEG ME09 Installation, Operation And Maintenance Manual

3.2-02
INTRO BREAKER
TRIP UNIT
A
LOCKS ACCESSORIES
padlocking device is present on both slides and each can
accept up to three padlocks with a hasp dimension of 3 to 8
mm (see Fig. 3.5). It can only be used when the breaker's
mobile por on is in DISCONNECTED posi on and fully
removed from the casse e.
To engage the device and place padlocks :
1. Ensure that the breaker's mobile por on is in
DISCONNECTED posi on an is fully removed from the
casse e.
2. Push the slides back into the casse e.
3. Place padlocks.
To disengage the locking feature, simply remove the padlocks
and re-extend the drawout slides to allow their use again.
The cabinet d oor can be closed with the padlocking feature
engaged.
Do not a empt to forcefully extend the slides
whilst padlocked.

Casse e Security Keylocking

An op onal feature allowing the user to place up to 2 locks
that each can lock the breaker in TEST or DISCONNECTED
posi on (see Fig. 3.6). It is not possible to close the breaker,
either electrically or manually whilst the lock's are engaged.
Access to the racking handle storage loca on is also
prevented.
The casse e keylocking device is a factory mounted
accessory. The device allows the uses of two Ronis or two
Profalux keylocks (cannot be mixed).
The locks can be bought separately and mounted in the eld.
For instruc ons on how to install the keylocks, see sec on 4 of
this manual.
To engage the device and lock the casse e :
1. Ensure that the breaker's mobile por on is in TEST or
DISCONNECTED posi on and is fully removed from the
casse e.
2. Remove and store the Racking Handle. (In it's storage
loca on)
3. Rotate one or both keys an clockwise and remove the
key's).
To disengage the locking feature, simply reinsert the key and
rotate it clockwise. Both keys MMUST be present to disengage
the locking feature.
For instruc ons on how to install this device see sec on 4 of
this manual.
TESTS APPENDIX