Siemens SIMATIC Equipment Manual page 32

Article number
Encoder supply
24 V encoder supply
•
•
Power loss
Power loss, typ.
Address area
Address space per module
•
Hardware configuration
Submodules
•
Digital inputs
Number of digital inputs
Digital inputs, parameterizable
Source/sink input
Input characteristic curve in accordance with IEC
61131, type 3
Number of simultaneously controllable inputs
all mounting positions
Input voltage
•
•
•
Input current
•
Input delay (for rated value of input voltage)
for standard inputs
Cable length
•
Encoder
Connectable encoders
•
Interfaces
Number of PROFINET interfaces
1. Interface
Interface type
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
Equipment Manual, 06/2021, A5E46570510-AB
Short-circuit protection
Output current, max.
Inputs
Number of configurable submodules, max.
–
up to 60 °C, max.
Rated value (DC)
for signal "0"
for signal "1"
for signal "1", typ.
–
parameterizable
unshielded, max.
2-wire sensor
–
permissible quiescent current (2-wire sen-
sor), max.
Technical specifications
6ES7141-6BH00-0BB0
Yes; Group-by-group for 2 channels, electronic
100 mA; per output
8.1 W
2 byte; + 2 bytes for QI information
2
16
Yes
P-reading
Yes
16
24 V
-30 to +5 V
+11 to +30V
2.4 mA
Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
30 m
Yes
1.5 mA
1
PROFINET with 100 Mbit/s full duplex (100BASE-
TX)
31