GE Vivid T8 Basic Service Manual page 141

3-9-5-2 Configurable Remote Path User
NOTE:
NOTE:
NOTE:
NOTE:
Vivid T8/Vivid T8 Pro – Basic Service Manual
5718826-100 English Rev. 10
The default User/Password is always used as primary log in
credential. No attempt is made to use the secondary user if log
in succeeds using the primary.
The configurable User/Password is used for all remote paths
configurable throughout the system as secondary log in
credential.
The User on the remote share must have all rights/controls for
the shared folder.
Follow these steps to set up a Secondary Remote Path User:
1. Press F2 on the control panel and log on as administrator if
required.
2. Select Connectivity -> Tools.
The Tool sheet is displayed.
Figure 3-44. The Tools sheet
3. Enter the User and Password in the respective fields.
The filed User can either be on the form of username or
domain\username.
Connectivity setup
3-57