Address Space - Siemens SIMATIC S7-1500 Manual

Parameters/address space

4.2 Address space

4.2 Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the
outputs/inputs.
Configuration options of DQ 8x24VDC/2A HF
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 3 Configuration options
Configuration
1 x 8-channel without value status
1 x 8-channel with value status
1 x 8-channel with value status for mod-
ule-internal Shared Output with up to 4
submodules
1 x 8-channel with value status (channel
0 and channel 4 for PWM)
Value status (Quality Information, QI)
The value status is always activated for the following module names:
● DQ 8x24VDC/2A HF QI
● DQ 8x24VDC/2A HF MSO
● DQ 8x24VDC/2A HF PWM
An additional bit is assigned to each channel for the value status. The bit for the value status
indicates if the output value specified by the user program is actually pending at the module
terminal (0 = value is incorrect).
Note
The maintenance interrupt "Limit value warning" has no effect on the value status.
26
Short designation/module
name in the GSD file
DQ 8x24VDC/2A HF
DQ 8x24VDC/2A HF QI
DQ 8x24VDC/2A HF MSO
DQ 8x24VDC/2A HF PWM
DQ 8x24VDC/2A HF Digital Output Module (6ES7522-1BF00-0AB0)
Configuration software, e.g., STEP 7 (TIA Portal)
Integrated in hard-
ware catalog STEP 7 (TIA Portal) V12
STEP 7 (TIA Portal) or higher or STEP 7 V5.5
X
X
V13 Update 3 or
higher
(PROFINET IO only)
as of V13 SP1
with HSP 0178
Manual, 06/2018, A5E03485650-AF
GSD file in
SP3 or higher
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)