Advertisement
Base attachment FDB291
Designation plate FDBZ291
Base attachment humid FDB293
Base attachment wet FDB295
Designation plate DBZ1193A
Building Technologies
Fire Systems
Function:
For routing surface-mounted cables larger than Ø 6 mm
Detector base is secured with a snap fastener
For labeling with the location address
Can only be used without detector base seal FDBZ295
For achieving a higher protection category
For mounting in wet or humid environments
Required when using detector heating unit FDBH291
Required when using protective cage DBZ1194 or EMC-protective cage
FDBZ294
Mounted between detector base and ceiling
Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.
Base attachment wet with additional integrated rubber seal for mounting in wet
or humid environments
For achieving a higher protection category
For mounting in wet or humid environments
Required when using detector heating unit FDBH291
Required when using protective cage DBZ1194
Mounted between detector base and ceiling
Detector base mounted quickly: The detector base simply clicks into place in
base attachment wet FDB295.
For labeling with the location address
Can only be used with base attachment wet FDB295
5
007026_s_en_--
2018-06-15
Advertisement
