Advertisement
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to
normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated
capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage,
misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.)
to the surface of the product resulting from misuse; (b) contact with liquid, water, rain,
extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c)
use of the Products or Accessories for commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of
MOTOROLA or BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result
from the use of Non-Motorola branded or certified Products or Accessories or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service,
testing, adjustment, installation, maintenance, alteration, or modification in any way
by someone other than MOTOROLA, BINATONE or its authorized service centers, are
excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that
have been removed, altered or obliterated; (b) broken seals or that show evidence
of tampering; (c) mismatched board serial numbers; or (d) non-conforming or non-
Motorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories
due to any communication service or signal you may subscribe to or use with the
Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information ?
To obtain service or information, please call:
ULive Chat: motorolastore.support/en
E-mail: support@motorolastore.com
You will receive instructions on how to ship the Products or Accessories at your expense
and risk, to a BINATONE Authorised Repair Center. To obtain service, you must include:
(a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes
the date, place and seller of the Product; (c) if a warranty card was included in your
box, a completed warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and telephone
number.
These terms and conditions constitute the complete warranty agreement between you
and BINATONE regarding the Products or Accessories purchased by you, and supersede
any prior agreement or representations, including representations made in any literature
publications or promotional materials issued by BINATONE or representations made by
any agent, employee or staff of BINATONE, that may have been made in connection with
the said purchase.
Disposal of the Device (Environment)
At the end of the product life cycle, you should not dispose of this product
with normal household waste. Take this product to a collection point for the
recycling of electrical and electronic equipment. The symbol on the product,
user's guide and/or box indicates this obligation.
By taking end-of-life products to a recycling point, you are ensuring that some of the
product materials can be re-used. By reusing some parts or raw materials from used
products, you make an important contribution to the protection of the environment.
Please contact your local authorities should you require additional information on the
collection points in your area.
IMPORTANT INFORMATION REGARDING ELECTROMAGNETIC
COMPATIBILITY(EMC)
With the increased number of electronic devices such as PC's and mobile (cellular)
telephones, medical devices in use may be susceptible to electromagnetic interference
from other devices. Electromagnetic interference may result in incorrect operation of
the medical device and create a potentially unsafe situation.
Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with
the aim to prevent unsafe product situations, the IEC 60601-1-2:2014 standard has
been implemented. This standard defines the levels of immunity to electromagnetic
interferences as well as maximum levels of electromagnetic emissions for medical
devices. Medical devices manufactured by AViTA Corporation. conform to this IEC
60601-1-2:2014 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
The use of accessories and cables other than those specified by manufacturer, with
the exception of cables sold by manufacturer as replacement parts for internal
components, may result in increased emission or decreased immunity of the device.
• The medical devices should not be used adjacent to or stacked with other
equipment. In case adjacent or stacked use is necessary, the medical device
should be observed to verify normal operation in the configuration in which it
will be used.
• Refer to further guidance below regarding the EMC environment in which the
device should be used.
Model name: NT17
Ref. no. MBP66N
Standard Specification for Infrared Thermometer: ASTM E 1965-98 : 2016
China Manufacturing License(s) : SSYJXSCX20040018
Registration Certificate(s) : SXZZ20182200808
Manufacturer : AViTA (WuJiang) Co.LTD.
Add.: No. 858, Jiao Tong Rd., Wujiang Economic Development Zone, Suzhou City ,
Jiangsu Province, P.R.C.
Tel: +86-512-8207-8288
Made in China
Download User Guide from website: www.motorolastore.com/support
Manufactured, distributed or sold by Binatone Electronics International LTD.,
official licensee for this product. MOTOROLA and the Stylized M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC.
and are used under license. All other trademarks are the property of their
respective owners. © 2020 Motorola Mobility LLC. All rights reserved.
%
Printed in China
Version 1.0
Advertisement
