Huawei B2368 User Manual page 157

LTE CPE B2368
User Guide
Figure 20-2 Maintenance > Remote MGMT > TR069
The following table describes the fields in this screen.
Table 20-2 Maintenance > Remote MGMT > TR069
Label
TR-069
ACS Server
URL
ACS Username
ACS Password
Periodic Inform
Periodic Inform
Interval
Connection
Request Port
Connection
Request
Username
Connection
Request
Password
Apply
Cancel
Issue 03 (2019-01-31)
Description
Select Active to activate remote management via TR-069 on the WAN.
Enter the URL or IP address of the auto-configuration server.
Select the Enable check box for the corresponding services that you
want to allow access to the LTE Device from the WAN.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select this to set a time interval (in seconds) at which the LTE Device
sends information to the auto-configuration server.
Enter the time interval (in seconds) at which the LTE Device sends
information to the auto-configuration server.
Specify the port number the ACS uses to request a connection to the
LTE Device.
Enter the username for authenticating the ACS when it requests a
connection to the LTE Device.
Enter the password for authenticating the ACS when it requests a
connection to the LTE Device.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Copyright © Huawei Technologies Co., Ltd.
20 Remote MGMT
149