Summary of Contents for Canon Creative Park Elastic-powered Bus
Page 1
Elastic-powered Bus : Assembly Instructions Assembly Instructions Notation Key 1. Carefully cut out the parts. 2. Fold along the dotted lines, making mountain Scissors line Mountain fold or valley folds as indicated. 3. Attach the glue spots on each part together. 4.
Page 2
Elastic-powered Bus : Assembly Instructions Assemble the tires Glue Glue Back Fold in half along the fold lines, After gluing parts M and N together back to back, glue together at the back and make a ring. attach the ring you have made. Adding curves to the part first will make it Follow the same process to assemble G, H and I.
Page 3
Elastic-powered Bus : Assembly Instructions Assemble the front and back wheels If necessary, cut off the ends. Attach the tires to both ends of the axle. Follow the same process to assemble Tie one end of the band to the band stopper, Cut the rubber band the back wheels.
Page 4
Elastic-powered Bus : Assembly Instructions On the front wheel side, slot the Attach. protruding parts into the slots. Pull the band stopper through the hole in part R. Be careful that the band doesn't come undone. Wind the rubber band around The front wheels (with the bigger tires) can be the front wheels (with the bigger tires).
Elastic-powered Bus : Assembly Instructions How to play Pull the car backwards along the ground, gently pushing down on the front wheels. Point the car in the direction you want it to run, let it go and watch it take off! Be careful not to wind the band too tightly as it may snap or come untied.