Sony HVL-F43M Service Manual page 8

HVL-F43M
2-7. MAIN (B), FRESNEL LENS
3 claw
2 two tapping screws
(M2.0 4.5)
A
1 Rotate the main (E) block in
the direction of an arrow A,
and set the flash unit to the
position of 90°.
2-8. WIDE PANEL ASSY
8
2 two tapping screws
(M2.0 4.5)
3 two claws
flash unit
2 two claws
2 two tapping screws
Note 1: When installing the main (B), confirm that
(M2.0 4.5)
6 main (B)
5 two silicon washers
4 Remove the main
(B) block in the
direction of an
arrow.
7 acrylic panel
1 two tapping screws
(M2.0
5 wide panel assy
4 catch sheet
i r i i e i
silicon washers are present at the two locations
specified in the figure.
silicon washers
main (B)
– Upper view –
Note 2: Be careful not to pollute,
such as fingerprints.
7 acrylic panel
Note 2: Be careful not to pollute,
such as fingerprints.
4.5)
3 main cover