DeWalt DWE490 Original Instructions Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Grinder
  5. DWE490
  6. Original instructions manual

DeWalt DWE490 Original Instructions Manual

Large angle grinder
Hide thumbs Also See for DWE490:
Table of Contents

Advertisement

Quick Links

DWE490
DWE492
DWE492S
DWE493
DWE494
Final Page size: A5 (148mm x 210mm)

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DWE490

Summary of Contents for DeWalt DWE490

  • Page 1 DWE490 DWE492 DWE492S DWE493 DWE494 Final Page size: A5 (148mm x 210mm)
  • Page 2 English (original instructions) Copyright D WALT...
  • Page 3 Fig. A (DWE494) Fig. C Fig. B...
  • Page 4 Fig. D Fig. E Fig. G Fig. F...

  • Page 5: Technical Data

    English LARGE ANGLE GRINDER DWE490, DWE492, DWE492S, DWE493, DWE494 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data...

  • Page 6: Definitions: Safety Guidelines

    English plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b ) Avoid body contact with earthed or grounded Markus Rompel surfaces such as pipes, radiators, ranges and Vice President of Engineering, PTE-Europe refrigerators.
  • Page 7 English tool safety principles. A careless action can cause severe Operations for which the power tool was not designed injury within a fraction of a second. may create a hazard and cause personal injury. c ) Do not use accessories which are not specifically 4) Power Tool Use and Care designed and recommended by the tool a ) Do not force the power tool.

  • Page 8: Causes And Operator Prevention Of Kickback

    English k ) Position the cord clear of the spinning accessory. If snag the rotating accessory and cause loss of control you lose control, the cord may be cut or snagged and your or kickback. hand or arm may be pulled into the spinning accessory. e ) Do not attach a saw chain woodcarving blade or l ) Never lay the power tool down until the accessory toothed saw blade.

  • Page 9: Electrical Safety

    English Electrical Safety d ) Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and The electric motor has been designed for one voltage only. carefully reenter the cut. The wheel may bind, walk up Always check that the power supply corresponds to the voltage or kickback if the power tool is restarted in the workpiece.

  • Page 10: Soft Start Feature

    English Markings on Tool No-volt Release Switch The following pictograms are shown on the tool: DWE494 only The on/off switch has a no-volt release function. If the tool Read instruction manual before use. should become disconnected from the power source for any reason, the switch has to be deliberately reactivated.

  • Page 11: Prior To Operation

    English Fitting and Removing a Grinding or Cutting • Make sure the disc or wheel rotates in the direction of the arrows on the accessory and the tool. Disc (Fig. A, D, E) • Do not use a damaged accessory. Before each use inspect WARNING: Do not use a damaged disc.

  • Page 12: Cutting Metal

    English If the power supply is shut off by the RCD, take the tool to • Never work with the grinding cup without a suitable protection guard in place. authorised D WALT repair agent. WARNING: In extreme working conditions, conductive • Do not use the power tool with a cut-off stand. dust can accumulate inside the machine housing when •...

  • Page 13: Maintenance

    English MAINTENANCE Accessory Chart Your D WALT power tool has been designed to operate Max. Min. Periphical Threaded [mm] over a long period of time with a minimum of maintenance. Rotation speed hole length [mm] Continuous satisfactory operation depends upon proper tool [min.
  • Page 14 English GRINDING AND CUTTING ACCESSORY CHART Guard Type Accessory Description How to Fit Grinder Depressed centre grinding disc TYPE 27 Type 27 guard gUARD Flap wheel Backing flange Type 27 depressed centre wheel Wire wheels Threaded clamp nut Wire wheels with threaded nut Type 27 guard Wire wheel...
  • Page 15 English GRINDING AND CUTTING ACCESSORY CHART (CONT.) Guard Type Accessory Description How to Fit Grinder Masonry cutting disc, bonded TYPE 1 Type 1 guard gUARD Metal Backing flange cutting disc, bonded Cutting wheel Diamond cutting Threaded clamp nut wheels TYPE 1 gUARD TYPE 27 gUARD...
  • Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)

This manual is also suitable for:

Dwe492Dwe492sDwe493Dwe494

Table of Contents