Sony HDVF-C30WR Maintenance Manual page 25

Data write procedure
Data write procedure in the PLD is outlined below.
For details of data write procedure, refer to "Download Tool Operating Instruction for Device Program-
ming" which is available in the same site where the PLD Download Tool software is available.
1. Prepare the Project fi le.
n
Download the Project fi le from the Sony Database Server.
2. Push the release knob and remove the VF tube. (Refer to Section 1-7-2, step 1.)
3. Perform steps 1 to 4 of "1-7-1. Replacing the LCD
Module."
4. Connect the camera to the connector (CN1) on the
PR-312 board using the connecting cable.
5. Turn off the power of the camera. Connect the PC
parallel port to the EPR connector of the target board
(CN500/PR-312 board or CN3/VPR-103 board) using
the PLD download tool cable.
6. Turn on the power of the camera.
Start the Download Tool software and read the Project
fi le.
7. Program the PLD with the PLD Download Tool soft-
ware.
8. When the programming completes correctly (without
an error message), restart the device.
HDVF-C30WR
CN500
VPR-103 board
CN3
CN1
PR-312 board
1-19 (E)