Page Number - Hitachi ZW 100-G Workshop Manual

TO THE READER
•
This manual is written for an experienced technician
to provide technical information needed to maintain
and repair this machine.
• Be sure to thoroughly read this manual for cor-
rect product information and service procedures.
ADDITIONAL REFERENCES
•
Please refer to the other materials (operator's
manual, parts catalog, engine technical material
and Hitachi training material etc.) in addition to this
manual.
MANUAL COMPOSITION
•
This manual consists the Technical Manual and the
Workshop Manual.
• Information included in the Technical Manual:
technical information needed for redelivery and
delivery, operation and activation of all devices
and systems, operational performance tests, and
troubleshooting procedures.

PAGE NUMBER

•
Each page has a number, located on the center
lower part of the page, and each number contains
the following information:
Example : T 1-3-5
INTRODUCTION
Consecutive Page Number for Each Group
Group Number
Section Number
T: Technical Manual
• If you have any questions or comments, at if you
found any errors regarding the contents of this
manual, please contact using "Service Manual
Revision Request Form" at the end of this man-
ual.
(Note: Do not tear off the form. Copy it for us-
age.):
Publications Marketing & Product Support
Hitachi Construction Machinery Co. Ltd.
TEL: 81-29-832-7084
FAX: 81-29-831-1162
E-mail: dc@hitachi-kenki.com
• Information included in the Workshop Manual:
technical information needed for maintenance
and repair of the machine, tools and devices
needed for maintenance and repair, maintenance
standards, and removal/installation and assem-
ble/disassemble procedures.
W: Workshop Manual
IN-01