NEC SL2100 User Manual page 2

Multiline terminal

Hide thumbs Also See for SL2100:

Before using Your Terminal...

Thank you for purchasing NEC SL2100 system.

Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ

from those in this guide. Check with your NEC Authorized Supplier / System Administrator and

make a note of any differences.

Installing the Handset and Line Cord

Adjust the two-position Viewing Angle

To set the low viewing angle position:

1. Fold the legs all the way back.

NEC Corporation reserves the right to change the specifications, functions, or features at any time without notice.

NEC Corporation has prepared this document for use by its employees and customers. The information contained

herein is the property of NEC Corporation and shall not be reproduced without prior written approval of NEC

Corporation.

When installing the handset :

1. Make sure the handset cord is plugged into

the handset jack on the telephone base.

2. The line cord routes through the channel on

the telephone base.

3. Alternatively the line cord can route through

the channel on the telephone legs.

To set the high viewing angle position:

1. Flip up the two leg supports.

2. Fold the legs back until the supports contact the base.