Getting Started; Inserting The Memory Card; Installation - HP F230 User Manual

2 Getting Started

2.1 Inserting the Memory Card

Insert the memory card, with the pins facing
towards the front of the device, until it clicks
into place.
Remove Memory Card
Push the edge of the memory card inward until you feel it click, then allow it to push out
until you can remove it from the slot.
WARNING:
It is recommended to format the memory card before initial use. Please note that all
data saved on the memory card will be erased after formatting.
Note:
• Supports Micro SDHC cards up to 32GB (Class 4 or above).
• Do not remove or insert memory card whilst the device is powered on - this may
damage the memory card.

2.2 Installation

Please follow the below instructions for mounting your camcorder to your vehicles
windshield:
1. Slide the car mount into the slot on top of the device until a click sound is heard.
2. Peel off the protective plastic backing from the suction-cup. Place the device on your
windshield and firmly press down on the lever to secure.
-4-