Operation; Operation Of The Bite Block; Transducer Cover Usage Precautions - Hitachi MXS2ESLL1 Probe Instruction Manual

Table of Contents

Advertisement

4. Operation

This chapter describes the operation of the probe.

4-1. Operation of the bite block

Put this in patient's mouth so that keep the path of the probe inserted into the body
Warning
Use the bite block supplied with the probe.
If the probe is bitten, the probe may be damaged and a hazard to the patient will occur.

4-2. Transducer cover usage precautions

Inside of transducer cover, use the sterilized echo jelly(gel) which is attached transducer cover
Sterilized echo jelly(gel) which is attached transducer cover
Warning
Use the transducer cover over the insertion portion.
If the transducer cover is not used and will contact Lignocaine Hydrochloride such as xylocaine
jelly or gel , this may cause exterior deterioration.
Use Hitachi-approved transducer cover only.
If use transducer cover which not reccomended can cause an adverse reaction by the body of the patient..
Check that the transducer cover is sterilized.
Use of an infected item could spread infection to the patient.
Inside of transducer cover, use the sterilized echo jelly(gel) which is attached
transducer cover If use echo jerry which not reccomended by instruction manual, it is cause to
deterioration.probe surface.
Do not reuse the transducer cover .
Use of an infected item could spread infection to the patient.
Do not apply unsterilized acoustic medium to the outer surface of the transducer cover .
Use of an acoustic medium that is contaminated by a pathogen can cause an infection on the patient.
DM# 126288 V1
Probe
Bite block SP-7901
Figure 4
Transducer cover
Figure 5
-9-
MN1-6403 Rev. 1

Advertisement

Table of Contents
loading

Table of Contents