Advertisement
7. Secure the wire harness to the harness bracket with the
push mount and a cable tie
Note: If the old push mount is still in the hole,
remove it.
Figure 5
1. Harness bracket
2. Push mount
8. Plug the generator interface on the wire harness into
the terminal on the generator, near the engine.
Note: On Model 04530 (gasoline engine), the
generator is located in the center of the machine
frame
(Figure
6); on Model 04540 (diesel engine), the
generator is located outside the machine frame
7).
Figure 6
Model 04530
1. Frame
2. Generator
(Figure
5).
3. Cable tie
(Figure
3. Terminal
1. Frame
2. Generator
9. Slowly turn the ring on the generator-interface
connector clockwise to align the other connector and
secure the connection.
Important: Ensure that the terminals are fully
connected. A loose connection may cause excess
heat from the electrical current, leading to product
damage.
10. Connect the appropriate terminals to the reel motors
(Figure
8).
Note: Ensure that the connectors click together so
that they are secure.
1. Generator plug
2. Terminals to the main wire
harness
3. Terminals to reel 2
3
Figure 7
Model 04540
3. Terminal
Figure 8
4. Terminals to reel 1
5. Terminals to reel 3
Advertisement
