1. Bolt
2. Nut
7
Installing the Exhaust
Guard (CE Only)
Parts needed for this procedure:
1
Exhaust guard
4
Self-tapping screw
Procedure
1.
Position the exhaust guard around the muffler
while aligning the mounting holes with the holes
in the frame
(Figure
Figure 10
3. Arm of hood-lock bracket
11).
g012631
1. Exhaust guard
2.
Secure the exhaust guard to the frame with 4
self-tapping screws
8
Installing the Roll Bar
Parts needed for this procedure:
1
Roll-bar assembly
4
Flange-head bolts
4
Locknuts
1
Hose clamp
Procedure
Important:
Never weld or modify a rollover
protection system (ROPS). Replace a damaged
ROPS; do not repair or revise it.
1.
Lower the roll bar onto the traction unit mounting
brackets, aligning the mounting holes. Ensure
that the vent tube on the roll bar is on the left
side of the machine
16
Figure 11
(Figure
11).
(Figure
12).
g008875