Ultra high-speed, high-accuracy laser displacement sensor sensor head (2 pages)
Summary of Contents for Panasonic HL-C2 Series
Page 2
Thank you for purchasing Ultra High-Speed, High-Accuracy Laser Displacement Sensor “HL-C2 Series”. To fully use this product safely and properly, please read this manual carefully. See our Website (https://panasonic.net/id/pidsx/global) for the latest information about the product and latest user’s manual. ■ Note 1.
Preface Whole USER’S MANUAL Construction The HL-C2 Series is prepared for the following user’s manuals. Read them as necessary. HL-C2 Series USER’S MANUAL (PDF) This manual describes cautions for using HL-C2 Series, and installation method, operation method, function details, Ultra High-Speed, High-Accuracy...
Page 4
This manual describes installation method, operation Intelligent Monitor AiM method, functional details and error messages of the software. It also describes an evaluation analysis of HL-C2 Series or use of buffering function and received light intensity waveform display function, which are useful for optimum ME-HLCSAIM-08 2013.6...
Preface Manual Construction This chapter provides cautions for safe and correct Preface operation of the product. Be sure to read this chapter. General This chapter explains the general description of Description Ethernet. Communication This chapter explains settings of communication tool Tool Software software Configurator WD.
Preface Safety Precautions This product is intended to detect the objects and does not have the control function to ensure safety such as accident prevention. Do not use the product as a sensing device to protect human body. Please use the products that comply with local laws and standards for human body protection specified by e.g., OSHA, ANSI and IEC.
Please read “HL-C2 Series USER’S MANUAL” (separate volume) for a detailed description of each system function and information on operational precautions. Correct Handling For the items listed below, refer to “HL-C2 Series USER’S MANUAL” (separate volume). ・ Installation Environment ・ Use Environment ・...
General description This chapter explains the general description of Ethernet. 1-1 Ethernet Specifications ··················· 1-2 1-2 Ethernet Communication Settings ····· 1-3...
Chapter 1 General description 1-2 Ethernet Communication Settings Communication Tool Software Configurator WD To perform Ethernet communication, use the communication tool software Configurator WD to make communication settings. To make HL-C21C settings, install the Configurator WD first. * The user can download the Configurator WD for free from our website. By communication settings, the measurement data can be automatically written to the PLC register.
Chapter 2 Communication Tool Software Configurator WD Setting Items The Configurator WD makes it possible to change the following setting items. Settings IP address Item Content Default value Acquires the IP address from the DHCP Automatic server if [Get IP Address to auto] is selected. Use this IP getting of IP Sets the IP address manually if [Use this IP...
Page 15
Chapter 2 Communication Tool Software Configurator WD Item Content Default value Set the IP address of the communicating device Destination IP Set an IP address other than 192.168.1.10 Address 0.*.*.*, 255.*.*.*, *.*.*.0 and *.*.*.255. Set the destination port Destination Port number of the 9094 communicating device.
Page 16
Chapter 2 Communication Tool Software Configurator WD Data Allocations to Output Destination Register Example: The output destination register is set to DT100. Register Content Remarks number 1:Head A Received Light Intensity Refreshes data on the head A received light intensity. 2:OUT1 Measurement Value Refreshes data on the OUT1 measurement value.
Select the [Search] menu or click the [Search Unit] button. Search Unit * Search for Panasonic devices connected to the network. Change in IP Address Settings Take the following procedure to change the IP address settings in the HL-C21C.
Page 18
Chapter 2 Communication Tool Software Configurator WD Set the IP address. * Make IP address settings according to the network environment in use. Press the [OK] button. Click the [OK] button when the following screen appears. Run [Search Unit] again to search for the HL-C21C. Search Unit...
Page 19
Chapter 2 Communication Tool Software Configurator WD Settings for Ethernet Communication Environment You can set the measurement information to be automatic acquisition and communication settings to match the (PLC) control devices to be connected. Select the HL-C2 in which the setting changes are to be made. Select [Communication Setting] in the [Edit] menu or click the right mouse button and select [Communication Setting].
Page 21
Chapter 2 Communication Tool Software Configurator WD iQSS-supporting PLC manufactured by Mitsubishi Electric Corp. (MELSEC-L Series)
Page 22
Chapter 2 Communication Tool Software Configurator WD MC protocol-supporting PLC manufactured by Mitsubishi Electric Corp. (MELSEC-Q Series) 2-10...