Cooling Circuit Connections - Siemens SINAMICS S120 Equipment Manual

Line Modules
4.2 Basic Line Modules
4.2.3.7 DRIVE-CLiQ interfaces X400, X401, X402
Table 4-4 DRIVE-CLiQ interfaces X400, X401, X402
PIN
1
2
3
4
5
6
7
8
A
B
Blanking plate for DRIVE-CLiQ interface: Tyco, order no.: 969556-5
4.2.3.8

Cooling circuit connections

Table 4-5
Connection
Inlet, return
Locked-rotor torque
Note
The seals for the screwed connections can be used only once when the cooling circuit is first
assembled. The seals must be replaced if the circuit is disassembled and assembled again.
4-8
Signal name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
GND (0 V)
Cooling circuit connections
Technical specifications
Screwed hose connection, male thread 3/4", flat sealing
60 Nm
SINAMICS S120 Equipment Manual, Edition 04/2007, 6SL3097-2AM00-0BP2
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
24 V power supply
Electronic ground
Chassis Power Units Liquid Cooled