Ip Address - LG GEN2 Series Installation And Operation Manual

Expansion
Board Address Offset
Exp 1 2 No
Exp 2 3 No
Exp 3 4 No
Exp 4 5 No
Exp 5 6 No
Exp 6 7 No

IP ADDRESS

The controller's IP address must be unique within it TCP/IP network. The controller may have a DHCP server-
assigned address or a manually-assigned static IP address. IP addresses are configured at the factory as follows:

DHCP: off

IP address: 192.168.1.101

Subnet mask: 255.255.255.0

Gateway: 192.168.1.1

DNS: 0.0.0.0
The controller's default address may need to be changed. This address can be set manually at the Main/Ctrl
Variables/Advanced/Network Settings screen. A service password is required to change this setting.
DIP SWITCH SETTINGS FOR CAREL c.cPOe EXPANSION BOARD
Baud
Rate Protocol
19.2K Modbus Off Off
19.2K Modbus Off Off
19.2K Modbus Off ON
19.2K Modbus Off ON
19.2K Modbus Off ON
19.2K Modbus Off ON
Address Ext
ON Off Off
ON ON Off
Off Off Off
Off ON Off
ON Off Off
ON ON Off
Baud Prot
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off