Maintenance Agreement; Maintenance Schedule; Decommissioning; Temporary Shutdown - Bosch VLS 3132 H Original Instructions Manual

Double scissor lifting platform
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
8.5.1

Maintenance agreement

i
Regular upkeep of the lifting platform is essential to
ensure a long service life and permanent readiness
for use. We recommend concluding a maintenance
agreement with Bosch customer service or an
authorized service agent.
8.5.2

Maintenance schedule

Component
x
x
x
Stickers
x
x
x
Access ramp
x
x
x
Electrical wiring
x
x
x
Hydraulic system
x
x
Exposed surfaces
and edges
x
x
Exposed surfaces
and edges
x
x
Microswitch
(foot protection)
x
Hydraulic unit
x
Moving compo-
nents
x
Shear connectors
Robert Bosch GmbH
Activity
Visual inspection:
All stickers must be present
and clearly legible.
Visual inspection:
Components must not be da-
maged. Check locking.
Visual inspection:
No damage to insulation.
Visual inspection:
No escape of fluid.
Cleaning:
Clean all contaminated surfaces
and apply preservative agent if
applicable.
Paint care:
Sand down paint blemishes
with sand paper (grain size
120) and touch up with the ap-
propriate RAL shade.
Function test:
Raise and lower the lifting plat-
form.
Check fluid level in tank:
With the lifting platform fully lo-
wered, the tank must be filled
up to the "MIN" marking.
Top up with the specified hyd-
raulic fluid if necessary.
Check lubrication:
Lubricate all moving compo-
nents as per lubrication chart.
Check the tightening torque.
Re-tighten to a torque of 50 Nm
if necessary.
Decommissioning | VLS 3132 H | 33
9.

Decommissioning

9.1

Temporary shutdown

In the event of lengthy periods of non-use:
Disconnect the VLS 3132 H from the mains.
Lock the rotary reversing switch.
9.2

Change of location

If the VLS 3132 H is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
The VLS 3132 H is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
9.3

Disposal and scrapping

9.3.1

Substances hazardous to water

!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
9.3.2

VLS 3132 H and accessories

1. Disconnect the VLS 3132 H from the mains and de-
tach the power cord.
2. Dismantle the VLS 3132 H and sort out and dispose
of the different materials in accordance with the ap-
plicable regulations.
The VLS 3132 H is subject to the European
directive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Make use of the local return and collection
systems for disposal.
Proper disposal of the VLS 3132 H pre-
vents environmental pollution and possible
health hazards.
en
|
1 689 989 107
2012-09-10

Advertisement

Table of Contents
loading

Table of Contents