Configure a Beacon 6 (HA-0336W-B)
1
Figure 44
Table 37
Field
Application Name
WAN Port
LAN Port
Internal Client
Protocol
Enable Mapping
WAN Connection List
104
Select Application > Port forwarding from the top-level menu in the Ethernet Gateway
window, as shown in Figure 44.
Port forwarding window
Table
37
describes the fields in the port forwarding window.
Port forwarding parameters
Description
Choose an application name from the drop-down menu
WAN port range
LAN port range
Choose a connected device from the drop-down menu and enter the
associated IP address
Choose the port forwarding protocol from the drop-down menu:
•
•
•
Select this checkbox to enable mapping
Choose a WAN connection from the drop-down menu
Note—only active devices are shown on this menu
3FE-47429-AAAA-TCZZA
TCP
UDP
TCP/UDP
Nokia WiFi Beacon 6 Product Guide
Issue: 01